‹‹ 上一主题 | 下一主题 ››
发新话题
打印

下载OpenVPN客户端 OpenVPN 2.1.1 -- released on 2009.12.11 Downloads

xuhl198

部门主管

Rank: 20Rank: 20Rank: 20Rank: 20Rank: 20

杰出贡献

1# 大 中 小 发表于 2010-2-2 09:57  只看该作者

下载OpenVPN客户端 OpenVPN 2.1.1 -- released on 2009.12.11 Downloads



       

       
       
下载OpenVPN客户端，通过VPN方式连接到服务器的主机上，完全使用服务器的DNS和进行私有网络数据传输；



                                        Downloads                       


       

                       
               
                                       









OpenVPN 2.1.1 -- released on 2009.12.11 (Change Log)



Changes include:



  • OpenVPN GUI is now packaged in the Windows installer.
  • Extensions to Management Interface to allow greater programmatic control of OpenVPN client and server.
  • topology subnet option, allowing intuitive tun-based VPN subnets
    having 1 IP address per client.
  • DHCP proxy support for Windows clients using the route-gateway dhcp option.
  • TAP-Win32 adapter can now be opened from non-administrator mode.
  • PKCS #11 features for usage of cryptographic tokens ("smart cards").
  • multihome option to enable UDP-based multihoming of the server on multiple interfaces.
  • port-share option to allow OpenVPN and an HTTPS server to share TCP port 443.
  • Users upgrading from 2.x should note that the new script-security option
    must be set to enable OpenVPN to run scripts.


See the man page for more information on added features.




















Source Tarball openvpn-2.1.1.tar.gz GnuPG Signature
Source Zip openvpn-2.1.1.zip GnuPG Signature
Windows Installer openvpn-2.1.1-install.exe GnuPG Signature





OpenVPN 2.0.9 -- released on 2006.10.01 (Change Log)

  

Source code and Windows packages are provided below. If you are
installing OpenVPN from an RPM package, don't forget to install an LZO
package as well (see below for LZO packages).   


Binary RPM packages for this version are usually available within a few days after the release date from Dag Wieers RPM site (or build one yourself).

  

If you'd like the Windows GUI version of OpenVPN, you can get it from Mathias Sundman's OpenVPN GUI site.

  



  
  
  


  
  
  


  
  
  

Source Tarballopenvpn-2.0.9.tar.gzGnuPG Signature
Source Zipopenvpn-2.0.9.zipGnuPG Signature
Windows Installeropenvpn-2.0.9-install.exeGnuPG Signature



  

Latest Beta Releases -- This folder contains beta releases which are primarily directed to developers and testers.





OpenVPN 1.6.0 -- released on 2004.05.09



Binary RPM packages for this version are available on the Dag Wieers RPM site.

  

NOTE: Windows XP Service Pack 2 breaks OpenVPN 1.6.0. If you are using XP SP2, it is recommended that you use OpenVPN 2.0.



  


Source Tarballopenvpn-1.6.0.tar.gz GnuPG Signature
Source Zipopenvpn-1.6.0.zip GnuPG Signature
Windows Installeropenvpn-1.6.0-install.exe GnuPG Signature
  

OpenVPN -- Older Releases

  

Older Releases -- This folder contains older OpenVPN releases not explicitly listed above.

  

LZO RPM Packages

  

The OpenVPN RPM package requires the LZO library for real-time link compression. (sources: Dag Wieers and SuSE distribution).



               
       

TOP

dinding

驴民技师

Rank: 4
2# 大 中 小 发表于 2010-2-12 23:21  只看该作者
有支持win 7的吗？
我在这个网下了一个。用注册的邮箱做帐号的。
但是最近用了win 7.这个软件不能用。

TOP

dinding

驴民技师

Rank: 4
3# 大 中 小 发表于 2010-2-12 23:55  只看该作者
Fri Feb 12 23:40:24 2010 OpenVPN 2.1.1 i686-pc-mingw32 [SSL] [LZO2] [PKCS11] built on Dec 11 2009
Fri Feb 12 23:40:36 2010 NOTE: OpenVPN 2.1 requires '--script-security 2' or higher to call user-defined scripts or executables
Fri Feb 12 23:40:37 2010 Control Channel Authentication: using 'ta.key' as a OpenVPN static key file
Fri Feb 12 23:40:37 2010 Outgoing Control Channel Authentication: Using 160 bit message hash 'SHA1' for HMAC authentication
Fri Feb 12 23:40:37 2010 Incoming Control Channel Authentication: Using 160 bit message hash 'SHA1' for HMAC authentication
Fri Feb 12 23:40:37 2010 LZO compression initialized
Fri Feb 12 23:40:37 2010 Control Channel MTU parms [ L:1542 D:166 EF:66 EB:0 ET:0 EL:0 ]
Fri Feb 12 23:40:37 2010 RESOLVE: Cannot resolve host address: v1.liveproxy.org: [TRY_AGAIN] A temporary error occurred on an authoritative name server.
Fri Feb 12 23:40:37 2010 Data Channel MTU parms [ L:1542 D:1450 EF:42 EB:135 ET:0 EL:0 AF:3/1 ]
Fri Feb 12 23:40:37 2010 Local Options hash (VER=V4): '504e774e'
Fri Feb 12 23:40:37 2010 Expected Remote Options hash (VER=V4): '14168603'
Fri Feb 12 23:40:38 2010 Socket Buffers: R=[8192->8192] S=[8192->8192]
Fri Feb 12 23:40:38 2010 UDPv4 link local: [undef]
Fri Feb 12 23:40:38 2010 UDPv4 link remote: 64.182.119.51:143
Fri Feb 12 23:40:38 2010 TLS: Initial packet from 64.182.119.51:143, sid=159f5a95 0e0d0155
Fri Feb 12 23:40:38 2010 WARNING: this configuration may cache passwords in memory -- use the auth-nocache option to prevent this
Fri Feb 12 23:40:39 2010 Replay-window backtrack occurred [1]
Fri Feb 12 23:40:39 2010 VERIFY OK: depth=1, /C=US/ST=CA/L=SanFrancisco/O=Erights-dot-Net/CN=erights.net/[email protected]
Fri Feb 12 23:40:39 2010 VERIFY OK: nsCertType=SERVER
Fri Feb 12 23:40:39 2010 VERIFY OK: depth=0, /C=US/ST=CA/L=SanFrancisco/O=Erights-dot-Net/CN=erights.net/[email protected]
Fri Feb 12 23:40:39 2010 Replay-window backtrack occurred [2]
Fri Feb 12 23:40:39 2010 Data Channel Encrypt: Cipher 'BF-CBC' initialized with 128 bit key
Fri Feb 12 23:40:39 2010 Data Channel Encrypt: Using 160 bit message hash 'SHA1' for HMAC authentication
Fri Feb 12 23:40:39 2010 Data Channel Decrypt: Cipher 'BF-CBC' initialized with 128 bit key
Fri Feb 12 23:40:39 2010 Data Channel Decrypt: Using 160 bit message hash 'SHA1' for HMAC authentication
Fri Feb 12 23:40:39 2010 Control Channel: TLSv1, cipher TLSv1/SSLv3 DHE-RSA-AES256-SHA, 1024 bit RSA
Fri Feb 12 23:40:39 2010 [erights.net] Peer Connection Initiated with 64.182.119.51:143
Fri Feb 12 23:40:42 2010 SENT CONTROL [erights.net]: 'PUSH_REQUEST' (status=1)
Fri Feb 12 23:40:42 2010 PUSH: Received control message: 'PUSH_REPLY,dhcp-option DNS 64.182.119.41,dhcp-option DNS 216.221.162.106,dhcp-option DNS 216.221.160.10,route 172.28.0.1,topology net30,ping 10,ping-restart 120,ifconfig 172.28.52.174 172.28.52.173'
Fri Feb 12 23:40:42 2010 OPTIONS IMPORT: timers and/or timeouts modified
Fri Feb 12 23:40:42 2010 OPTIONS IMPORT: --ifconfig/up options modified
Fri Feb 12 23:40:42 2010 OPTIONS IMPORT: route options modified
Fri Feb 12 23:40:42 2010 OPTIONS IMPORT: --ip-win32 and/or --dhcp-option options modified
Fri Feb 12 23:40:42 2010 ROUTE default_gateway=192.168.1.1
Fri Feb 12 23:40:42 2010 TAP-WIN32 device [本地连接 2] opened: \\.\Global\{5CE1E7D5-7446-426B-A582-A27ED6482315}.tap
Fri Feb 12 23:40:42 2010 TAP-Win32 Driver Version 9.6
Fri Feb 12 23:40:42 2010 TAP-Win32 MTU=1500
Fri Feb 12 23:40:42 2010 Notified TAP-Win32 driver to set a DHCP IP/netmask of 172.28.52.174/255.255.255.252 on interface {5CE1E7D5-7446-426B-A582-A27ED6482315} [DHCP-serv: 172.28.52.173, lease-time: 31536000]
Fri Feb 12 23:40:42 2010 NOTE: FlushIpNetTable failed on interface [14] {5CE1E7D5-7446-426B-A582-A27ED6482315} (status=5) : 拒绝访问。  
Fri Feb 12 23:40:47 2010 TEST ROUTES: 2/2 succeeded len=1 ret=1 a=0 u/d=up
Fri Feb 12 23:40:47 2010 C:\WINDOWS\system32\route.exe ADD 64.182.119.51 MASK 255.255.255.255 192.168.1.1
Fri Feb 12 23:40:47 2010 ROUTE: route addition failed using CreateIpForwardEntry: 拒绝访问。   [status=5 if_index=11]
Fri Feb 12 23:40:47 2010 Route addition via IPAPI failed [adaptive]
Fri Feb 12 23:40:47 2010 Route addition fallback to route.exe
Fri Feb 12 23:40:47 2010 ERROR: Windows route add command failed [adaptive]: returned error code 1
Fri Feb 12 23:40:47 2010 C:\WINDOWS\system32\route.exe ADD 0.0.0.0 MASK 128.0.0.0 172.28.52.173
Fri Feb 12 23:40:47 2010 ROUTE: route addition failed using CreateIpForwardEntry: 拒绝访问。   [status=5 if_index=14]
Fri Feb 12 23:40:47 2010 Route addition via IPAPI failed [adaptive]
Fri Feb 12 23:40:47 2010 Route addition fallback to route.exe
Fri Feb 12 23:40:48 2010 ERROR: Windows route add command failed [adaptive]: returned error code 1
Fri Feb 12 23:40:48 2010 C:\WINDOWS\system32\route.exe ADD 128.0.0.0 MASK 128.0.0.0 172.28.52.173
Fri Feb 12 23:40:48 2010 ROUTE: route addition failed using CreateIpForwardEntry: 拒绝访问。   [status=5 if_index=14]
Fri Feb 12 23:40:48 2010 Route addition via IPAPI failed [adaptive]
Fri Feb 12 23:40:48 2010 Route addition fallback to route.exe
Fri Feb 12 23:40:48 2010 ERROR: Windows route add command failed [adaptive]: returned error code 1
Fri Feb 12 23:40:48 2010 C:\WINDOWS\system32\route.exe ADD 172.28.0.1 MASK 255.255.255.255 172.28.52.173
Fri Feb 12 23:40:48 2010 ROUTE: route addition failed using CreateIpForwardEntry: 拒绝访问。   [status=5 if_index=14]
Fri Feb 12 23:40:48 2010 Route addition via IPAPI failed [adaptive]
Fri Feb 12 23:40:48 2010 Route addition fallback to route.exe
Fri Feb 12 23:40:48 2010 ERROR: Windows route add command failed [adaptive]: returned error code 1
Fri Feb 12 23:40:48 2010 Initialization Sequence Completed

TOP

emperor

驴民工程师

Rank: 5Rank: 5
4# 大 中 小 发表于 2010-8-13 17:40  只看该作者
看不懂

TOP

‹‹ 上一主题 | 下一主题 ››
发新话题